Characteristics of vibration polishing machine

- May 09, 2018-

1. The principle of the world's advanced spiral rolling and triple vibration is adopted to grind the parts and the rolling grinding tools to achieve the polishing effect.

2. The vibration polishing machine is suitable for grinding and polishing of small and small parts in large quantities, which can improve the working efficiency by 6~10 times, and the cost saving is about 1/3.

3. The vibration polishing machine does not damage the original size and shape of the parts in the vibration polishing process.

4. The vibration polishing function can realize automatic and unmanned operation, and it is convenient to operate. During the working process, the machining of parts can be checked at any time.

5. The vibration polishing machine of type A can automatically separate the abrasive and the workpiece, realize automatic selection and save labor cost.

Polishing process of zinc alloy vibration grinding machine.

1. Applicable product types.

Vibratory grinding machine is suitable for zinc alloy box buckle, hook button accessories, accessories, sanitary fittings, daily hardware.

Ii. Machine selection.

The machine chooses the bow type vibration grinding machine VB-350LD type.

3. Grinding steps.

1. Put the grinding stone into the vibration machine first, clean the water in clean water, power the machine, and adjust it to the appropriate frequency.

2. Put in the 30-50 KG products, abrasive dropping a KG, grinding machine time 80 minutes, and abrasive products produce chemical reaction becomes black, medicinal products become white hair bright, repeated grinding according to the product quality requirement

3. Grinding that developed with water clean, after the completion of brightener is one KG polishing 30 minutes to complete

4. Remove the product and then dry it.

4. Advantages of this process.

Reduce grinding process, improve quality and save cost. This process is used in chemical grinding.

Technical operation procedure of grinding machine.

1. Operation steps:

First of all, the sample needs grinding and grinding wheel into an Angle. Then the sample is uniformly moved and the force of the sample is equal. The final grinding is not timed.

2. Replace grinding wheel or other grinding tools and steps:

First turn off the power. Then remove the replacement parts and replace them with new ones. Finally, the part that is changed will shake.

3. Maintenance procedures, main points and maintenance cycle:

First of all, oil should be added before starting daily, to increase lubrication between sliding blocks. Then wipe off the grease and dust on the machine after work. Finally, check whether the machine will leak.

4. Operation safety requirements:

First of all, the operator should concentrate on his work and not be distracted. Finally, the staff must obey the arrangement of the cadres and guide the operation of the machine tools.

5. Troubleshooting (when the machine does not turn or leak) :

First check the power switch and the circuit. Then check the motor and connection. Finally, repair the motor.